ORING URETHANE

3.989" x 4.129" x 0.070" (101.32 mm x 104.88 mm x 1.78 mm)

H&D SKU: 045U70

Product Availability : On Back Order

$22.60

Qty:

DESCRIPTION

O-rings are the most common and cost-effective sealing elements available. They seal over a wide range of pressure, temperature and tolerance. They are an excellent option where space limitations are a concern. And with proper hardware design, o-rings can seal a wide range of pressures from low vacuum up to several thousand PSI. O-rings are available in a wide range of elastomers as well as PTFE.

Polyurethane (AU, EU): Polyurethane elastomers, as a class, have excellent wear resistance, high tensile strength and high elasticity in comparison with any other elastomers. Permeability is good and comparable with butyl.

Urethane o-rings are readily available in 70 and 90 durometer.

SEAL INFORMATION

Chemical Resistance:

PURE ALIPHATIC HYDROCARBONS (PROPANE, BUTANE).
MINERAL OIL AND GREASE.
SILICONE OIL AND GREASE.
WATER UP TO 125F (HYDROLYSIS-RESISTANT COMPOUNDS CAN RESIST UP TO 180F).

Not compatible with:

KETONES, ESTERS, ETHERS, ALCOHOL, GLYCOLS.
HYT WATER, STEAM, ALKALIS, AMINES, ACIDS.

Durometer (Shore A): 70

Temperature Range (F): -40 TO 180

Max Pressure (psi): 1,450 DEPENDING ON APPLICATION

Max Pressure (psi) WITH BACKUP RINGS: 5,000 DEPENDING ON APPLICATION

Max Speed (ft/sec): 1.5

Mating Surface Roughness - Ra (µin) - DYNAMIC: 16 MAX

Mating Surface Roughness - Ra (µin) - STATIC: 32 MAX

Part Number Definition (Inch): (AS568 3-DIGIT NUMBER)U70

Additional Part Number Definition (Inch): 4"ID X .210"CS = 345U70

Products specifications

ID (Inch)	3.989
OD (Inch)	4.129
Height (Inch)	0.070
ID (Metric)	101.32
OD (Metric)	104.88
Height (Metric)	1.78

Alternate Product Codes

(243)
,
NOV0089 (1)

Recently viewed products

ORING URETHANE