U-CUP PISTON METRIC

0.236" x 0.433" x 0.157" (6.00 mm x 11.00 mm x 4.00 mm)

H&D SKU: MUA-6X11X4P

Product Availability : On Back Order

$2.84

Qty:

DESCRIPTION

The MUA-P is a metric asymmetrical single-acting pneumatic piston seal. This seal is available in a wide range of rod diameters, but specifically meets the requirements for seals with the smallest possible housings. For these small seals, although cross-sections and heights are very small, the sealing performance is excellent.

The MUA-P is an extremely low friction seal because of the short contact of the sealing surface area. Back-up rings or brackets are not required because of the special design.

The MUA-P is composed of nitrile making it resistant to water and most oils while maintaining good low-pressure sealing.

SEAL INFORMATION

Durometer (Shore A): 80

Temperature Range (F): -22 TO 212

Max Pressure (psi): 1160

Max Speed (ft/sec): 1.5

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 0.8 MAX

Part Number Definition (Metric): MUA-(ID)X(BORE DIAMETER)X(HT)P

Additional Part Number Definition (Metric): 78 X 100 X 6 = MUA-78X100X6P

Products specifications

ID (Inch)	0.236
OD (Inch)	0.433
Height (Inch)	0.157
ID (Metric)	6.00
OD (Metric)	11.00
Height (Metric)	4.00

Alternate Product Codes

MUKPN-11X6X4 (1)

Recently viewed products

U-CUP PISTON METRIC