VEE SETS METRIC

9.449" x 10.276" x 1.772" (240.00 mm x 261.00 mm x 45.00 mm)

H&D SKU: MVS-240X261X45-UN

Product Availability : On Back Order

$1,045.00

Qty:

DESCRIPTION

Our MVS metric vee packing sets consist of neofab fabric-reinforced nitrile (neofab) vees only or a combination of neofab and nitrile vees. The male and female adapters are typically nylon or polyacetal to provide high structural strength and as bearing surfaces in demanding applications.

These parts are 'stacked' together and must be lubricated liberally with clean operating fluid prior to assembly. The packing must be axially pre-loaded by the housing. This pre-loading works through the male adaptor on the pressure side by exerting a hinging action on the vees, which forces the sealing lips apart to ensure a low pressure seal. As the pressure increases, so the hinging action increases, increasing the effectiveness of the seal even where severe vibration, shock loading and knuckling may occur.

SEAL INFORMATION

Material Type (Primary Seal): FABRIC-REINFORCED NITRILE

Material Type (Primary Seal): NITRILE

Material Type (Adapters): NYLON OR POLYACETAL

Temperature Range (F): -30 TO 220

Max Pressure (psi) - 3 Rings: 500

Max Pressure (psi) - 4 Rings: 3000

Max Pressure (psi) - 5 Rings: 5000

Max Pressure (psi) - 6 Rings: 10000

Extrusion Gap at Various Pressures (mm):

1,500 PSI: 0.25
2,250 PSI: 0.40
3,500 PSI: 0.25
6,000 PSI: 0.20

Max Speed (ft/sec): 1.5

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 1.6 MAX

Part Number Definition (Metric): MVS-(ID)X(OD)X(STACK HEIGHT)

Additional Part Number Definition (Metric): 70 X 85 X 22.5 = MVS-70X85X22.5

Products specifications

ID (Inch)	9.449
OD (Inch)	10.276
Height (Inch)	1.772
ID (Metric)	240.00
OD (Metric)	261.00
Height (Metric)	45.00

Recently viewed products

VEE SETS METRIC