WIPER SNAP-IN METRIC

Sorry - this product is no longer available

13.386" x 14.173" x 0.394" (340.00 mm x 360.00 mm x 10.00 mm)

H&D SKU: MW-340X360X10E

Product Availability : On Back Order

$513.50

Qty:

DESCRIPTION

The MW-E style metric wiper has the function to keep out extremely fine dust, metal particles, grains of sand etc. such that the bearing elements and seals behind it are not subjected to premature wear as a result of contaminant ingress.

Molded in urethane, the MW-E wiper can be used with mineral oils and many other types of hydraulic fluid.

Care must be taken to ensure that there is no pressure build-up, including grease lubricant pressure, on the inside of the wiper.

SEAL INFORMATION

Durometer (Shore A): 93

Temperature Range (F): -30 TO 220

Max Speed (ft/sec): 3.0

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 1.6 MAX

Part Number Definition (Metric): MW-(ROD DIAMETER)X(OD)X(BASE HEIGHT)E

Additional Part Number Definition (Metric): 40 X 48 X 5 = MW-40X48X5E

Products specifications

ID (Inch)	13.386
OD (Inch)	14.173
Height (Inch)	0.394
ID (Metric)	340.00
OD (Metric)	360.00
Height (Metric)	10.00