HUNGER PARTS

14.488" x 14.961" x 1.378" (368.00 mm x 380.00 mm x 35.00 mm)

H&D SKU: WRFA 380X35

Product Availability : On Back Order

$518.98

Qty:

DESCRIPTION

Manufactured by Hunger Hydraulics®, the WRFA metric wear ring is mainly used on pistons. It provides guiding and bearing surfaces between the piston and cylinder tube and prevents metal to metal contact between them.

The WRFA wear ring consists of an extremely abrasion-resistant and low friction POM-PTFE/Bronze compound. It can be used for mineral-based, water-based and fire-resistant fluids as well as compressed air.

This wear ring has a U-shaped cross-section and is split with an angled butt joint. It can be easily expanded for fitting into corresponding installation grooves on the piston. The U-shaped groove arrangement secures the wear ring against axial movement.

SEAL INFORMATION

Temperature Range (F): -65 TO 248

Max Speed (ft/sec): 9.8

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 0.8 MAX

Part Number Definition (Metric): WRFA (BORE DIAMETER)X(HEIGHT)

Additional Part Number Definition (Metric): 100MM BORE X 10.6 WIDE = WRFA 100X10.6

Products specifications

ID (Inch)	14.488
OD (Inch)	14.961
Height (Inch)	1.378
ID (Metric)	368.00
OD (Metric)	380.00
Height (Metric)	35.00

Recently viewed products

HUNGER PARTS