ORING URETHANE

1.748" x 1.992" x 0.122" (44.40 mm x 50.60 mm x 3.10 mm)

H&D SKU: 3.1X44.4U90

Product Availability : In Stock

$4.03

Qty:

DESCRIPTION

O-rings are the most common and cost-effective sealing elements available. They seal over a wide range of pressure, temperature and tolerance. They are an excellent option where space limitations are a concern. And with proper hardware design, o-rings can seal a wide range of pressures from low vacuum up to several thousand PSI. O-rings are available in a wide range of elastomers as well as PTFE.

Polyurethane (AU, EU): Polyurethane elastomers, as a class, have excellent wear resistance, high tensile strength and high elasticity in comparison with any other elastomers. Permeability is good and comparable with butyl.

We stock a limited number of metric sizes, but please contact H&D if the size you need is not listed.

SEAL INFORMATION

Chemical Resistance:

PURE ALIPHATIC HYDROCARBONS (PROPANE, BUTANE).
MINERAL OIL AND GREASE.
SILICONE OIL AND GREASE.
WATER UP TO 125F (HYDROLYSIS-RESISTANT COMPOUNDS CAN RESIST UP TO 180F).

Not compatible with:

KETONES, ESTERS, ETHERS, ALCOHOL, GLYCOLS.
HYT WATER, STEAM, ALKALIS, AMINES, ACIDS.

Durometer (Shore A): 90

Temperature Range (F): -40 TO 180

Max Pressure (psi): 2,250 DEPENDING ON APPLICATION

Max Pressure (psi) WITH BACKUP RINGS: 5,000 DEPENDING ON APPLICATION

Max Speed (ft/sec): 1.5

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.4 MAX

Mating Surface Roughness - Ra (µm) - STATIC: 0.8 MAX

Part Number Definition (Metric): (CS)X(ID)U90

Additional Part Number Definition (Metric): 10MM ID X 2MM CS = 2X10U90

Products specifications

ID (Inch)	1.748
OD (Inch)	1.992
Height (Inch)	0.122
ID (Metric)	44.40
OD (Metric)	50.60
Height (Metric)	3.10

Alternate Product Codes

RU90J-G045Y0100 (1)

Recently viewed products

ORING URETHANE