WIPER D-STYLE

4.500" x 5.250" x 0.375" (114.30 mm x 133.35 mm x 9.53 mm)

H&D SKU: D4500-T820

Product Availability : In Stock

$21.85

Qty:

DESCRIPTION

The D-XLF is the Hallite T820 style wiper designed to fit the same grooves as standard D-wipers. However this profile was developed for harsher environments where the wiper is subject to numerous contaminants, such as Agriculture, Off-Highway and Forestry equipment. The D-XLF has a debris guard which entirely covers the retaining groove keeping all contaminants and fluids from entering and offers added protection to the integrity of the hydraulic system.

The D-XLF incorporates the same I.D. ribs found on the D-XL to enhance low-friction operation, as well as prevent pressure traps between the wiper and the primary rod seal.

The shell is molded in Hythane-181 polyurethane, ensuring flexibility for installation and performance.

SEAL INFORMATION

Durometer (Shore A): 93

Temperature Range (F): -50 TO 230

Max Speed (ft/sec): 12.0

Mating Surface Roughness - Ra (µin) - DYNAMIC: 4<>16

Mating Surface Roughness - Ra (µin) - STATIC: 63 MAX

Part Number Definition (Inch): D(ROD DIAMETER)-T820 (EX: D4500-T820 FOR 4-1/2" ID)

Products specifications

ID (Inch)	4.500
OD (Inch)	5.250
Height (Inch)	0.375
ID (Metric)	114.30
OD (Metric)	133.35
Height (Metric)	9.53

Alternate Product Codes

ST-450-XLF (1)
,
4856600 (1)
,
1B251 (1)
,
GWS32-548 (1)

Recently viewed products

WIPER D-STYLE