PISTON SEAL 2-PC METRIC

8.858" x 9.449" x 0.315" (225.00 mm x 240.00 mm x 8.00 mm)

H&D SKU: MPS2000-240

Product Availability : On Back Order

$351.14

Qty:

DESCRIPTION

The MPS2000 piston seal is a double-acting piston seal capable of passing over ports. The reinforced, heat stabilized, thermoplastic sealing face expands and contracts to fill the gap between the piston and the cylinder wall and has a step-cut joint for easy installation.

The MPS2000 piston seal will tolerate a considerable extrusion gap, reducing the possibility of piston to bore contact. It also offers excellent static load holding capability, and can easily pass over ports.

The square section nitrile energizer responds quickly to pressure changes, providing excellent sealing characteristics under all pressure conditions.

SEAL INFORMATION

Material Type (Primary Seal): GLASS-FILLED NYLON

Material Type (Energizer): 80A NITRILE

Rockwell Hardness (M) 77

Rockwell Hardness ( R) 114

Temperature Range (F): -40 TO 230

Max Pressure (psi): 7250

Extrusion Gap at

Max Pressure (mm): 0.80

Max Speed (ft/sec): 3.0

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 1.6 MAX

Part Number Definition (Metric): MPS2000-(BORE DIAMETER)

Additional Part Number Definition (Metric): 100MM BORE = MPS2000-100

Products specifications

ID (Inch)	8.858
OD (Inch)	9.449
Height (Inch)	0.315
ID (Metric)	225.00
OD (Metric)	240.00
Height (Metric)	8.00

Recently viewed products