PISTON SEAL PSQ

0.197" x 0.630" x 0.157" (5.00 mm x 16.00 mm x 4.00 mm)

H&D SKU: MPSQ-16X5X4.2

Product Availability : On Back Order

$23.79

Qty:

DESCRIPTION

The MPSQ profile is a bi-directional piston seal for use in medium to heavy duty applications. This seal has outstanding sliding properties with no stick-slip effect. The MPSQ is a unique seal design that includes a rubber quad seal in the PTFE cap to ensure drift free performance. The PTFE cap is a stable rectangular shape and is energized by a single square energizer.

The MPSQ piston seal is commonly used in applications such as mobile hydraulics, lift trucks, standard cylinders and piston accumulators.

SEAL INFORMATION

Material Type (Primary Seal): 40% BRONZE-FILLED PTFE

Material Type (Energizer): 70A NITRILE

Durometer (Shore D): 63

Temperature Range (F): -30 TO 212

Max Pressure (psi): 5800

Extrusion Gap at Various Pressures (mm):

1,500 PSI: 0.25
3,000 PSI: 0.15
5,800 PSI: 0.10

Max Speed (ft/sec): 6.5

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.3 MAX

Mating Surface Roughness - Ra (µm) - STATIC: 0.8 MAX

Part Number Definition (Metric): MPSQ-(BORE DIAMETER)X(ID)X(GROOVE WIDTH)

Additional Part Number Definition (Metric): 100 X 84.5 X 6.3 GROOVE WIDTH = MPSQ-100X84.5X6.3

IMPORTANT NOTE: THE ABOVE MAXIMUM VALUES FOR TEMPERATURE, PRESSURE AND SPEED CANNOT BE USED AT THE SAME TIME. E.G. THE MAXIMUM OPERATING SPEED DEPENDS ON MATERIAL TYPE, PRESSURE, TEMPERATURE AND GAP VALUE. TEMPERATURE RANGE ALSO DEPENDENT ON MEDIA.

Products specifications

ID (Inch)	0.197
OD (Inch)	0.630
Height (Inch)	0.157
ID (Metric)	5.00
OD (Metric)	16.00
Height (Metric)	4.00

Recently viewed products

PISTON SEAL PSQ