U-CUP ROD METRIC

1.575" x 2.205" x 0.472" (40.00 mm x 56.00 mm x 12.00 mm)

H&D SKU: MUA-40X56X12R

Product Availability : On Back Order

$8.50

Qty:

DESCRIPTION

The MUA-R is a metric asymmetrical single-acting pneumatic rod seal. This seal is available in a wide range of rod diameters, but specifically meets the requirements for seals with the smallest possible housings. For these small seals, although cross-sections and heights are very small, the sealing performance is excellent.

The MUA-R is an extremely low friction seal because of the short contact of the sealing surface area. Back-up rings or brackets are not required because of the special design.

The MUA-R is composed of nitrile making it resistant to water and most oils while maintaining good low-pressure sealing.

SEAL INFORMATION

Durometer (Shore A): 80

Temperature Range (F): -22 TO 212

Max Pressure (psi): 1160

Max Speed (ft/sec): 1.5

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 0.8 MAX

Part Number Definition (Metric): MUA-(ROD DIAMETER)X(OD)X(HT)R

Additional Part Number Definition (Metric): 22 X 29 X 5 = MUA-22X29X5R

Products specifications

ID (Inch)	1.575
OD (Inch)	2.205
Height (Inch)	0.472
ID (Metric)	40.00
OD (Metric)	56.00
Height (Metric)	12.00

Alternate Product Codes

MUKRN-40X56X12 (1)

Recently viewed products

U-CUP ROD METRIC