U-CUP PISTON METRIC

1.772" x 2.362" x 0.472" (45.00 mm x 60.00 mm x 12.00 mm)

H&D SKU: MUH-45X60X12PB-29

Product Availability : On Back Order

$40.24

Qty:

DESCRIPTION

The PB-29 is a two-piece piston seal molded from polyurethane for abrasion and extrusion resistance and employs a hard nylon anti-extrusion ring as a companion piece

This seal is typically found in Asian manufactured lift truck cylinders.

SEAL INFORMATION

Material Type (Primary Seal): POLYURETHANE

Material Type (Support Rings): NYLON

Durometer (Shore A): 90

Temperature Range (F): -40 TO 220

Max Pressure (psi): 3000

Max Speed (ft/sec): 3.0

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 0.8 MAX

Part Number Definition (Metric): MUH-(ID)X(BORE DIAMETER)X(HT)PB-29

Additional Part Number Definition (Metric): 55 X 70 X 12 = MUH-55X70X12PB-29

Products specifications

ID (Inch)	1.772
OD (Inch)	2.362
Height (Inch)	0.472
ID (Metric)	45.00
OD (Metric)	60.00
Height (Metric)	12.00

Alternate Product Codes

MHP29-060 (1)

Recently viewed products

U-CUP PISTON METRIC