U-CUP NEOFAB METRIC

1.969" x 2.362" x 0.374" (50.00 mm x 60.00 mm x 9.50 mm)

H&D SKU: MUH-50X60X9.5RB-F

Product Availability : On Back Order

$25.98

Qty:

DESCRIPTION

The RB-F is a compact low-friction seal with the advantage of an internal anti-extrusion ring. A rubberized fabric base, which gives strength and durability, and a rubber header are molded together forming the seal. It is designed to have a controlled pre-load across the angled rubber lips to ensure a good seal at low pressure.

The seal becomes more effective as the pressure increases and the rubberized fabric deforms to the housing to increase the seal contact area. The surface of the fabric has pockets which retain lubrication to reduce friction and wear.

The RB-F has a reinforced plastic anti-extrusion ring at the internal heel of the seal to protect it against damage by extrusion and to allow a larger clearance between the rod and gland.

SEAL INFORMATION

Material Type (Primary Seal): NITRILE

Material Type (Base): FABRIC-REINFORCED NITRILE

Material Type (Support Rings): POLYACETAL

Durometer (Shore A): 80

Temperature Range (F): -22 TO 212

Max Pressure (psi): 5800

Extrusion Gap at Various Pressures (mm):

1,500 PSI: 0.90
2,400 PSI: 0.80
3,500 PSI: 0.70
5,800 PSI: 0.50

Max Speed (ft/sec): 1.5

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 1.6 MAX

Part Number Definition (Metric): MUH-(ID)X(OD)X(HT)RB-F

Additional Part Number Definition (Metric): 70 X 80 X 6 = MUH-70X80X6RB-F

Products specifications

ID (Inch)	1.969
OD (Inch)	2.362
Height (Inch)	0.374
ID (Metric)	50.00
OD (Metric)	60.00
Height (Metric)	9.50

Alternate Product Codes

Recently viewed products

U-CUP NEOFAB METRIC