WIPER SNAP-IN METRIC

0.984" x 1.457" x 0.236" (25.00 mm x 37.00 mm x 6.00 mm)

H&D SKU: MW-25X37X6SCK-N

Product Availability : In Stock

$16.90

Qty:

DESCRIPTION

The MW-SCK is a metric double lipped wiper molded in nitrile. The internal facing wiper lip regulates the lubrication film on the rod. The internal lip wipes any excess fluid film from the rod on the extending stroke and allows this excess fluid to return under the rod seal on the retracting stroke. This wiper also has a slight U style base which aids in its excellent leakage control, and small dust lip to prevent contaminants from entering through the groove.

These wipers, therefore improve the performance and extend the service life of rod sealing system. These wipers are commonly used in Toyota lift trucks.

SEAL INFORMATION

Durometer (Shore A): 90

Temperature Range (F): -49 TO 212

Max Speed (ft/sec): 3.0

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 1.6 MAX

Part Number Definition (Metric): MW-(ID)X(OD)X(BASE HEIGHT)SCK-N

Additional Part Number Definition (Metric): 60 X 74 X 8 = MW-60X74X8SCK-N

Products specifications

ID (Inch)	0.984
OD (Inch)	1.457
Height (Inch)	0.236
ID (Metric)	25.00
OD (Metric)	37.00
Height (Metric)	6.00

Alternate Product Codes

Recently viewed products