WIPER SNAP-IN METRIC

2.756" x 3.150" x 0.248" (70.00 mm x 80.00 mm x 6.30 mm)

H&D SKU: MW-70X80X6.3P

Product Availability : Only 2 Left

$22.35

Qty:

DESCRIPTION

The MSWP is a single acting metric rod wiper with additional static sealing lip and bearing segments; sealing edge of wiper lip is slightly rounded.

The additional static sealing lip prevents ingress of dirt and water spray. The wiper lip with slightly rounded sealing edge reliably wipes dirt away and leaves a residual oil film on the retracting rod; improving friction behavior and service life. The support on the wiper heel prevents twisting in the groove as well as pressure build-up between wiper and seal.

These wipers are typically used in earth moving equipment, agricultural machinery, injection moulding machines, telescopic cylinders, presses, industrial vehicles, cranes, mining, loading platforms and support cylinders.

SEAL INFORMATION

Durometer (Shore A): 95

Temperature Range (F): -30 TO 230

Max Speed (ft/sec): 6.0

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 1.6 MAX

Part Number Definition (Metric): MW-(ROD DIAMETER)X(OD)X(BASE HEIGHT)P

Additional Part Number Definition (Metric): 40 X 48 X 4 = MW-40X48X4P

Products specifications

ID (Inch)	2.756
OD (Inch)	3.150
Height (Inch)	0.248
ID (Metric)	70.00
OD (Metric)	80.00
Height (Metric)	6.30

Alternate Product Codes

MSWP-70X80X6.3 (1)

Recently viewed products