WEAR STRIP METRIC

METRIC BRONZE/PTFE WEAR STRIP

H&D SKU: MWS-02.5X1.6BT

Product Availability : On Back Order

$17.00

Qty:

DESCRIPTION

Our MWS-BT is a 40% bronze-filled PTFE metric wear strip has the ability to support side loads and eliminate ‘stick slip’ between moving parts. The accurately dimensioned rectangular cross section is produced from a special combination of PTFE and Bronze materials. It has excellent heat resistance and strength to resist creep, making it suitable for bearings with reciprocating, oscillating or rotary movement, whether lubricated or not.

Standard ring thicknesses range from 1mm to 3mm but other thicknesses are also available. The standard range of cross section sizes are proportioned to be wrapped around a wide range of rod or piston diameters.

This material is compatible with hydraulic mineral oil, lubricating oil, water based and synthetic fire resistant fluids and lubricating grease. Although the material is rated at 390°F, the recommended maximum temperature for bearing applications is 140°F.

SEAL INFORMATION

Durometer (Shore D): 62

Temperature Range (F): -58 TO 390

Compressive Strength (psi) - Temp = 73F: 2900

Compressive Strength (psi) - Temp = 176F: 1300

Max Speed (ft/sec): 15.0

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.4 MAX

Mating Surface Roughness - Ra (µm) - STATIC: 3.2 MAX

Part Number Definition (Metric): MWS-(WIDTH)X(CS)BT

Additional Part Number Definition (Metric): 25MM WIDE X 2.5MM CS = MWS-25.0X2.5BT

Alternate Product Codes

6663000 (1)

Recently viewed products

WEAR STRIP METRIC