WEAR STRIP METRIC

METRIC POLYESTER/FABRIC WEAR STRIP

H&D SKU: MWS-15.0X2.5F

Product Availability : In Stock

$31.31

Qty:

DESCRIPTION

The MWS-F bearing strip provides an extremely effective, hard wearing and easy to use bearing material.

Manufactured to very tight tolerances and providing bearing solutions for reciprocating, oscillating and slow rotary movement applications, the MWS-F bearing strip is used in many of today’s most arduous hydraulic applications around the world. Commonly fitted in reciprocating cylinders rod and piston bearings, MWS-F bearing strip is capable of withstanding extreme side-loads preventing metal to metal contact.

The material’s design incorporates micro indentations on the bearing strip’s surface to trap fluid and provide built-in lubrication to the bearing. The MWS-F bearing strip is manufactured by a patented process, using a woven fabric reinforced polyester resin material and is proved to be compatible with a wide range of fluids, including mineral oils, water based fluids and phosphate esters, to produce a rectangular section strip which is available in a wide range of inch sizes.

SEAL INFORMATION

Temperature Range (F): -40 TO 250

Compressive strength at Failure (psi) - Temp = 73F: 65000

Compressive Strength (psi) - Temp = 73F: 16500

Compressive Strength (psi) - Temp = 176F: 8500

Extrusion Gap at Various Cross-Sections (mm):

2mm CS (nominal): MAX = 0.5 / MIN = 0.4
2.5mm CS (nominal): MAX = 0.75 / MIN = 0.4
3mm CS (nominal): MAX = 1.0 / MIN = 0.4
4mm CS (nominal): MAX = 1.25 / MIN = 0.4
6mm CS (nominal): MAX = 1.5 / MIN = 0.4

Max Speed (ft/sec): 16.0

Maximum Speed for Rotary Shafts (ft/sec)

120 PSI: 16.0
900 PSI: 3.0
1500 PSI: 0.3

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.4 MAX

Mating Surface Roughness - Ra (µm) - STATIC: 3.2 MAX

Part Number Definition (Metric): MWS-(WIDTH)X(CS)F

Additional Part Number Definition (Metric): 25MM WIDE X 2.5MM CS = MWS-25.0X2.5F

Alternate Product Codes

Recently viewed products

WEAR STRIP METRIC