WIPER PRESS-IN INCH

0.984" x 1.457" x 0.236" (25.00 mm x 37.00 mm x 6.00 mm)

H&D SKU: NN-49524-L6004

Product Availability : On Back Order

$21.84

Qty:

DESCRIPTION

Our KBI-N wiper is a double lipped metal cased wiper designed to press-fit into open groove housings. This wiper comprises a heavy duty nitrile wiping lip which is securely bonded to a nitrided metal case, eliminating the potential for rust. Opposite the wiping lip are two sealing lips accurately produced and proportioned to collect the fluid passing through the rod seal.

Capable of operating in dirty conditions, the proportions of the nitrile wiping lip allow it to follow the side movement of the rod to clear away heavily deposited dirt.

This wiper is typically found in Asian manufactured heavy equipment cylinders.

SEAL INFORMATION

Material Type (Primary Seal): NITRILE

Material Type (Casing): CARBON STEEL

Durometer (Shore A): 90

Temperature Range (F): -20 TO 250

Max Speed (ft/sec): 3.0

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 1.6 MAX

Part Number Definition (Metric): MMC-(ROD DIAMETER)X(OD)X(HT)KBI-N

Additional Part Number Definition (Metric): 70 X 84 X 8 = MMC-70X84X8KBI-N

Products specifications

ID (Inch)	0.984
OD (Inch)	1.457
Height (Inch)	0.236
ID (Metric)	25.00
OD (Metric)	37.00
Height (Metric)	6.00

Recently viewed products

WIPER PRESS-IN INCH

WIPER PRESS-IN INCH

WIPER PRESS-IN METRIC

WIPER PRESS-IN METRIC