DESCRIPTION
The TP-L style locking T-seal can replace conventional T-seals in any application. The TP-L style seal is designed to retrofit standard O-ring, T-seal and Crown Seal grooves. The TP-L seal provides all of the benefits of a T-seal and adds nylon back-ups that lock on each side of the rubber base. The TP-L is not currently available in Intermediate and Wide Base profiles.
The TP-L is molded in Nitrile, ensuring flexibility for installation and performance at various temperatures. Also available in Fluorocarbon for temperatures up to 400F
The TP-L is directly interchangeable with corresponding T-seal, standard O-ring, PSC and PSM seal grooves.
SEAL INFORMATION
Material Type (Primary Seal): NITRILE
Material Type (Support Rings): NYLON
Durometer (Shore A): 70
Temperature Range (F): -35 TO 265
Max Pressure (psi): 5000
Extrusion Gap WITH WEAR RINGS at Various Pressures (in):
Extrusion Gap WITHOUT WEAR RINGS at Various Pressures (in):
Max Speed (ft/sec): 1.6
Mating Surface Roughness - Ra (µin) - DYNAMIC: 3<>12
Mating Surface Roughness - Ra (µin) - STATIC: 32 MAX
Part Number Definition (Inch): TP-(3-DIGIT NUMBER)-L