T-SEAL PISTON

5.500" x 6.000" x 0.368" (139.70 mm x 152.40 mm x 9.35 mm)

H&D SKU: TP-055L

Product Availability : On Back Order

$69.19

Qty:

DESCRIPTION

The TP-L style locking T-seal can replace conventional T-seals in any application. The TP-L style seal is designed to retrofit standard O-ring, T-seal and Crown Seal grooves. The TP-L seal provides all of the benefits of a T-seal and adds nylon back-ups that lock on each side of the rubber base. The TP-L is not currently available in Intermediate and Wide Base profiles.

The TP-L is molded in Nitrile, ensuring flexibility for installation and performance at various temperatures. Also available in Fluorocarbon for temperatures up to 400F

The TP-L is directly interchangeable with corresponding T-seal, standard O-ring, PSC and PSM seal grooves.

SEAL INFORMATION

Material Type (Primary Seal): NITRILE

Material Type (Support Rings): NYLON

Durometer (Shore A): 70

Temperature Range (F): -35 TO 265

Max Pressure (psi): 5000

Extrusion Gap WITH WEAR RINGS at Various Pressures (in):

5,000 PSI: 0.004

Extrusion Gap WITHOUT WEAR RINGS at Various Pressures (in):

5,000 PSI 0.012

Max Speed (ft/sec): 1.6

Mating Surface Roughness - Ra (µin) - DYNAMIC: 3<>12

Mating Surface Roughness - Ra (µin) - STATIC: 32 MAX

Part Number Definition (Inch): TP-(3-DIGIT NUMBER)-L

Products specifications

ID (Inch)	5.500
OD (Inch)	6.000
Height (Inch)	0.368
ID (Metric)	139.70
OD (Metric)	152.40
Height (Metric)	9.35

Alternate Product Codes

TP-055-L (1)
,
LTP-433 (1)

Recently viewed products

T-SEAL PISTON