OIL SEALS METRIC

0.984" x 1.378" x 0.236" (25.00 mm x 35.00 mm x 6.00 mm)

H&D SKU: MOS-25X35X6BABSL

Product Availability : Only 7 Left

$26.02

Qty:

DESCRIPTION

The BABSL and TCN style oil seals have a short, flexible spring-loaded sealing lip making it preferable in pressurized units without additional backup rings e.g. for rotational pressure sealing in hydraulic pumps, hydraulic motors, hydrodynamic clutches. These seals can resist operating pressures of 50-150 PSI, and there are special designs that can operate up to 350 PSI.

The BABSL and TCN seals provide reliable sealing of the housing bore, even with increased roughness of the bore, thermal expansion and split housings. This style also has an additional dust lip which acts as an additional seal against moderate to medium dust and dirt ingress from outside.

These seals come in both nitrile (BABSL or TCN) and fluorocarbon (BABSLV or VTCN). In instances where thermal stability and chemical resistance is needed, the fluorocarbon version should be used.

SEAL INFORMATION

Material Type (Primary Seal): NITRILE

Material Type (Primary Seal): FLUOROCARBON

Material Type (Casing): CARBON STEEL

Durometer (Shore A) NITRILE: 72

Durometer (Shore A) FLUOROCARBON: 75

Temperature Range (F) NITRILE: -40 TO 212

Temperature Range (F) FLUOROCARBON: -67 TO 320

Max Pressure (psi): 150 (DEPENDING ON APPLICATION)

Max Speed (ft/sec): 16.4

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4

Mating Surface Roughness - Ra (µm) - STATIC: 1.6 MAX

Part Number Definition (Metric): MOS-(ROD DIAMETER)X(OD)X(HT)BABSL (OR BABSLV FOR FLUOROCARBON)

Additional Part Number Definition (Metric): MOS-(ID)X(OD)X(HT)TCN (OR VTCN FOR FLUOROCARBON)

CLICK HERE TO SEE PRESSURE OIL SEAL STYLES

CLICK HERE TO SEE OIL SEAL MATERIALS AND SPECIFICATIONS

CLICK HERE TO SEE OIL SEAL SHAFT AND HOUSING SPECIFICATIONS

Products specifications